top of page

Conductive Plastic Linear Potentiometer

LP-10F Series

MIDORI PRECISIONS

LP-10F Series

is designed to be ...

  • Die-cast aluminum housing

  • Total Electrical Travel 10mm

  • 5-way mountings: Side A(Back), Side B(Front), Side D(Bottom)       


    

○ LP-10F (Down): M3 shaft 

○ LP-10FB (UP): M3 shaft, w/Back Spring

Have an evaluation (paid) sample request for this product or any questions about it?        Please contact us.

Product Specifications

CP2HX D_edited.jpg

Electrical Specifications


  • Effective Electrical Travel:  10mm

  • Independent Linearity:  ±1%FS

  • Total Resistance: 1KΩ

  • Rated Dissipation:  0.3W/50℃

  • Output: Voltage Ratio (0~100%Vin)


Mechanical Specifications


  • Total Mechanical Travel:  12mm

  • Friction: 0.3N MAX. (LP-10F)/ 3N MAX. (LP-10FB)

  • Weight:  Approx. 60g


Environmental Specifications


  • Category Temp. Range:  -40~+100℃

  • Vibration: 100m/S2 500Hz 3axis 2hours each

  • Shock: 500m/S2 11ms 3axis 6directions 3times each


APPLICATION EXAMPLES

Railroad Switch

Engin control.jpg
Point blades position

Bending Machine

Engin control.jpg
Foot peal

Dam

Engin control.jpg
Crack monitoring

DATA SHEET(PDF)/ CAD DATA (DXF)/ CONTACT

LP-10F
CP2HX.jpg
PDF
CAD
SHOP

Stroke: 10mm

Linearity: ±1%FS

Total Resistance: 1KΩ

LP-10FB
CP2HX.jpg
PDF
CAD
SHOP

Stroke: 10mm

Linearity: ±1%FS

Total Resistance: 1KΩ

w/ Back Spring

​
CP2HX.jpg
​
CP2HX.jpg
​
CP2HX.jpg
​
CP2HX.jpg
​
CP2HX.jpg
​
CP2HX.jpg
​
CP2HX.jpg
​
CP2HX.jpg
​
CP2HX.jpg
​
CP2HX.jpg
​
CP2HX.jpg
​
CP2HX.jpg
​
CP2HX.jpg
​
CP2HX.jpg

HANDLING INSTRUCTION

  • Miswiring may cause burnout of the resistive element.

  • To reduce sliding noise, add load resistance should be more than 100times and less than 1000times of total resistance.

  • Do not apply high-temperature solder on the terminals.

  • Slight continuous vibration such as dither might cause a short lifetime of the sensor.

bottom of page