Midori's Precision Potentiometer

The Midori Potentiometer is a precision position sensor that converts mechanical displacement such as rotational angle, tilt angle, and linear displacement to electrical signals.

Angle Potentiometer

Angle Potentiometers (also called "Rotary Potentiometers") are mainly used to measure or detect the angle and rotational position of mechanical movement.
There are two kinds of angle potentiometers: Single-turn potentiometers and Multi-turn potentiometers
The single potentiometer is used to measure the angle of less than 360°. On the other hand, the multi-turn potentiometer is required to measure the angle of more than 360°.

Contact Type Multi-Turn Potentiometer

Conductive Plastic and Wire-wound Multi-Turn potentiometers.

Resolution is practically infinity, and precision is high compared to contactless type.

HP-18 Series

Wire-Wound Multi-Turn Potentiometer

Size Φ22.22 mm
10-turn wire-wound potentiometer
Use with counting dial H-22, H-46, D-12, and D-15

CP-2F Gear Head Series

Conductive Plastic Multi-Turn Potentiometer

Size □30x28mm/ □34x47mm
Effective Electrical Travel: 3600°~18000°
Aluminum die-casting housing

CP-45F Gear Head Series

Conductive Plastic Multi-Turn Potentiometer

Size □50x61mm
Effective Electrical Travel: 3600°~36000°
Independent Linearity: ±0.1%FS

Contactless Type Multi-Turn Potentiometer

Hall-IC type contactless Multi-Turn Potentiometers.

There is no electrical noise in the output, low torque and low friction, and superior long life.

You can use Contactless type Multi-Turn Potentiometer for harsh environment usages such as under vibration and dither operation.

CP-22H Gear Head Series

Contactless Hall-IC Multi-Turn Potentiometer

Size □30x34mm
Effective Electrical Travel: 1800°~21600°
Single/ Dual output

CP-45H Gear Head Series

Contactless Hall-IC Multi-Turn Potentiometer

Size □50x61mm
Effective Electrical Travel: 3600°~ 36000°
Independent Linearity: ±0.4%FS